Re: water diffusion in epoxy on glass  


Posted by composite agency on August 13, 2007 at 17:32:40:

In Reply to: water diffusion in epoxy on glass posted by ronald anderson on May 15, 2007 at 10:36:14:

Hi Ronald,

We want to respond to your message, but the e-mail address is seemingly not functioning. Please contact us via composite agency

: Dear All:

: We have a question regarding our a sealed electronic package. We are using a welded and soldered metal package to ensure no significant moisture ingress during the lifetime of the product. This includes a glass to metal seal. Unfortunately, in our trials, we have found by He leak test that some of the glass seals can crack, so we want to use an epoxy material to seal any possible cracks. We would like some help in estimating the likely diffusion of water vapour through the epoxy, the influence of the adhesion between epoxy and the glass, and the possible effect on the product lifetime.

: Regards,
: Ronald Anderson


In addition the diffusion of solvent and gasoline in polymers and coating materials is of interest. Is there a strong dimensional change of the materials, such as epoxy, polyamide (nylon) and what about the subequent change of mechanical properties?



Return to Overview

Please feel free to post your follow-up message below:

Name:
e-Mail:
Subject:

Comments:


Return to Overview