 |
 |
 |
 |
Temperature & Diffusion coefficient
Posted by Ray O'Halloran on June 28, 2005 at 16:48:33:
I am working on polyurethane insulation on offshore oil, chemicals and gas pipelines and need to produce useable experimental data related to firstly obtaining a diffusion coefficient and secondly to measure the effects of temperaure change on the diffusion coefficient.
I am told that there is some debate as to the thickness of sample to be used as too thin a sample can give inaccurate results, any advice on this would be greatly appreciated.
Thanks,
- Re: Temperature & Diffusion coefficient Diffusion-polymers.com 06/29/05
(0)